Wiper blades may not be the most exciting topic for most Phoenix car owners – but they are pretty important. Most of us Phoenix drivers have had an experience when a sudden snow or rain storm hits while we’re driving; then when we turn on the wipers – nothing but streaks. This can be especially disconcerting at night when the glare of on-coming headlights distorts your vision.
Simple answer: change your wiper blades BEFORE they fail. Check them out every couple of months just to see how they are working. Of course, the more you use your wipers, the sooner they’ll wear out. Phoenix car owners with lots of storms or those who drive a lot in AZ where there are bugs and road grime will use their blades more.
But even when you’re not using your blades, they are exposed to sunlight, ozone, soap, and extreme hot and cold AZ temperatures which lead to deterioration. Your blades can just rot away and fall apart before you need them. Of course, using your wipers when the blades are torn can lead to scratches in your windshield. Phoenix drivers don’t want to risk a costly windshield replacement over the cost of a couple of wiper blades.
Now let’s talk about wiper blade upgrades. Phoenix motorists can upgrade both the design and the wiper material. Let’s start with the material. Traditional black rubber blades do a great job of clearing your windshield when they are new. Over time all of the conditions mentioned above damage them and degrade their performance. Silicone blades are far less affected by environmental conditions and will simply perform better for a longer time for Phoenix car owners.
There are two elements to the design. First, the wiper blade itself: Some have a single wiping edge. Others have multiple edges – kind of like a multi-blade razor. The idea is to maximize wiping power during both swipes of the blade.
The other design element is with the wiper frame. This is the structure that applies pressure on the blade as it passes over the windshield. A conventional frame has four to six contact points on the blade. These apply pressure used to clear water and snow. A beam frame provides uniform pressure along the entire surface of the wiper. Their shape catches the wind passing over the vehicle to provide additional downforce to help get a clean swipe. A hybrid frame has four to six contact points as with a conventional blade, but also incorporates an airfoil to provide additional downforce as with beam blades.
So which blade should you select? Well always use at least the grade and design that came with the vehicle from the automobile manufacturer. Upgrade for better performance and longer lasting blades. The extra cost of premium blades is a good value for this critical safety system.
While you’re at it, make sure you have plenty of windshield washer solvent (use a winter formulation when Phoenix temps drop below freezing) and that your washer nozzles are working well. Talk with your appreciative Hi-Tech Car Care service advisor about upgrading your wiper blades.
Give us a call
Hi-Tech Car Care
2924 E Thomas Road
Phoenix, AZ 85016
602.224.0941
At Hi-Tech Car Care in Phoenix AZ (85016) we install quality NAPA replacement parts. Give us a call at 602.224.0941. To learn more about NAPA AutoCare, visit NAPAAutoCare.
